這不是第一個臺式激光雕刻機。就消費類制造設備而言，它們非常普遍。然而，Wainlux K6如此緊湊，價格便宜，使得大多數人都應該能夠在其設置中添加一個。

It’s not the first desktop laser engraver. They’re quite common as far as consumer fabrication devices go.  The Wainlux K6, however, makes its case by being so compact and inexpensive, most anyone should be able to add one to their setup.

該設備專為便攜性而設計，尺寸僅為6.8 x 6.8 x 6.4英寸，使其足夠小，甚至可以放入較小的背包和手提箱中。這意味著，如果您想即時雕刻紀念品，贈品和其他小飾品，可以將其用于貿易展覽，聚會和其他活動。好吧，無論如何，無論何時貿易展覽，節日和其他公共聚會再次變得可行。

Designed for portability, the device measures just 6.8 x 6.8 x 6.4 inches, making it small enough to fit even inside smaller backpacks and carrying cases. That means, you can take it down to trade shows, parties, and other events if you want to engrave souvenirs, giveaways, and other trinkets on the fly. Well, whenever trade shows, festivals, and other public gatherings become viable again, anyway.

Wainlux K6配備了3000mW激光，可以在包括硬紙板，毛氈和織物之類的堅硬物體（如木材，橡膠和丙烯酸）等全部材料上刻錄圖像。認真地講，任何金屬以外的東西都應該是適合這種激光的游戲，您可以使用它來雕刻各種各樣的物體。它使用導軌和電機設置，允許激光頭在X和Y軸上移動，從而可以在3.14 x 3.14英寸的工作區域內壓印任何二維設計。我們知道，這看上去很小，但這就是其超便攜尺寸所帶來的限制。根據裝束，它的路由速度為每分鐘1500毫米，分辨率為508 dpi。

The Wainlux K6 is equipped with a 3000mW laser that allows it to burn images on a whole load of materials, from soft items like cardboard, felt, and fabrics to tougher ones like wood, rubber, and acrylic. Seriously, anything short of metals should be fair game for this laser, allowing you to use it to engrave a wide selection of objects. It uses a rail-and-motor setup to allow the laser head to move across the X and Y axis, allowing it to imprint any two-dimensional design within a 3.14 x 3.14 inch work area. We know, that seems awfully small, but that’s the limitation imposed by its ultra-portable size. According to the outfit, it has a routing speed of 1500 mm per minute and a 508 dpi resolution.

盡管工作區很小，但它確實內置了解決方法。您會看到，機器的整個基座都是開放的，您可以將其簡單地放置在要雕刻的任何對象之上，因此，您不僅可以在手機殼，錢包和類似的較小物品上放上雕刻圖案。這就是說，您可以使用它在皮革公文包，摩托車頭盔和家里有的每件家具上雕刻設計。更好的是，如果您要雕刻的標簽比工作區域所允許的大，您可以將設計切成3.14英寸的部分，然后一次雕刻一個部分，并隨身移動要雕刻的斑點。

While the work area is small, it does have a workaround built in. You see, the entire base of the machine is open, allowing you to simply place it on top of any object you want to engrave, so you’re not restricted to putting engravings on phone cases, wallets, and similarly smaller items. That means, you can use it to engrave designs on your leather briefcase, your motorcycle helmet, and every single piece of furniture you have at home if you feel like it. Even better, if you want to engrave a larger label than the work area allows, you can simply cut the design into 3.14-inch portions and engrave it one section at a time, moving the spot you want to engrave on as you go along.

Wainlux K6帶有一個對焦按鈕，可讓您旋轉焦距以獲得所需的精確雕刻，并帶有方向控件，可讓您上下，左右，左右移動激光頭。例如，您可以在柔軟的織物上工作時將其抬起，這樣就不會燒孔，而將設計留在較硬的材料（如木材）上以降低其燃燒力時，則不必降低它。

The Wainlux K6 comes with a focus button that allows you to rotate the focal length to get the exact kind of engraving you want, along with directional controls that let you move the laser head higher, lower, left, or right. You can, for instance, raise it when working on soft fabrics so you don’t burn a hole and lower it when leaving designs on harder materials like wood for maximum burning power.

它具有板載Wi-Fi，因此您可以使用智能手機（iOS和Android）或PC（Windows和Mac OS）以及USB插槽將設計發送到設備，以防將其束縛到自己的設備上。電腦代替。其功能包括內置保護鏡（無需佩戴護目鏡），安全傳感器（當其檢測到過熱或異常運動時立即關閉），并且其設計使其更易于更換激光頭進行維護。

It has onboard Wi-Fi, so you can send designs to the device either using your smartphone (iOS and Android) or a PC (Windows and Mac OS), as well as a USB slot, in case you want to tether it to your computer instead. Features include built-in protective lenses (no need to wear safety goggles), safety sensors (shuts down immediately when it detects overheating or unusual motion), and a design that makes it easier to replace the laser head for maintenance.

文章來源：coolthings